Automotive Technician For Hire in Karachi, Pakistan - iATN Auto Pro Careers

Actively Looking for Technician jobs and is willing to relocate for the right position.

It will be great pleasure to apply for the position of a Automotive Technician. I have been working as an Automotive Service Technician for over 11 years in International & Domestic Service industry and deem myself an excellent choice for this position. With my sound knowledge base of mechanical and electrical work and Initial Start with apprenticeship as a Maintenance Technician Mercedes Benz cars and a sizable background in working as a first point of contact in the automotive industry, I am quite sure that I can make a solid contribution to service department.

Being an active part of this industry for a good amount of time has instilled in me the capability to decipher a customer’s problem by merely interviewing him on demand and coordinated with service advisor.

I became the finalist of Mazda Technical Skills Contest 2015 U.A.E.

Since I am well-honed with all mechanical, advanced Electrical Diagnosing, repair and maintenance procedures in theory and practical, I am confident in doing the most appropriate procedures which has resulted in recurring business in my current and previous place of work. My profound ability to verify the symptoms and identify the problems in Vehicle and resolve customers’ issues in a proactive manner would let me handle problems in a manner that facilitate successful outcomes.

Skills & Knowledge

Carlines

Mercedes-Benz
Volkswagen/Audi
Mazda

Skills

5+ years Engine Performance / Driveability Analysis & Repair

2+ years Transmission / Transaxle Analysis & Repair

3+ years Electrical / Electronic Analysis & Repair

2+ years General Service

Tools and Equipment

Scan Tools

1. Auto Boss

2. Launch X 431

3. Xentry Diagnostics

4. WIS (Workshop information System) Mercedes

5. MMDS(Mazda Modular Diagnostic System)

6.MESI(Mazda Electronic service Information)

7. ODIS (Audi Scan Tool)

8. ELSA Portal (Audi/VW Service Portal)

8. Wheel Balancer

9. Tire fitting Machine

10. Robinar A.C System Service Machine

11. Toyota Intelligent Tester

Work Experience

Audi Technician

2019–Present

1. Perform Oil Service Work, 30K Service, and 45 K Service as per Audi Maintenance Table.

2. Perform Pending Campaigns and Software updates in Audi Vehicles as required.

3. Proficient use of Audi Service Portal “Elsa Pro” for Maintenance Tables, Current Flow Diagram, Workshop Manual and Service TPI’s, DISS Ticket Opening and Handle DISS at Level-1 and Level-2.

4. Use of ODIS Tester for Various Tasks Such as Service Resets, Fault Memory Reading, Follow Guided Fault Functions, RMVB, Perform Adaptation, Basic Setting.

5. Engine and Trans Assemblies Removal and Installation

6. Perform Recommended Service of DSG, S-Tronic, 0D5 8 Speed Automatic Transmission Recommended Service

7. Prepare Technical Reports for Various Warranty Repairs.

8. Use of ETKA Audi Parts Catalogue.

9. E-Tron Basic Inspection Work Such as Underbody Mechanical Systems Inspection, Indication and Fault Messages Understanding, Charging. (Quattro 50 Model Years-2020, 2021).

10. DISS Generation, Warranty Repairs and Documentation. PCC Claims.

Mercedes Benz Technician

2018–2019

1. Perform all type of Periodic Maintenance and Services as per Service codes/Workshop codes recommended by Manufacturer’s Specification.

2. Check Service History Log Book and Recommend the due Job (any Fluid Replace, Parts Replace).

3. Perform Full Vehicle Inspection of various Vehicle Systems, Computerized Scanning using European Vehicle Scanner, Service Resets, and TPMS Reset as a part of Vehicle Maintenance Schedule.

4. Prepare Complete Estimation, Note Measurement Values, Wear & Tear Condition of Vehicle Parts.

5. Perform Light Commercial Vehicles Diesel Engine Service, Additional repair and Parts replacement, Calibrations/Adaptations as per need.

6. Perform Inspection and Replacement of Suspension Worn & Defective Parts, Brake System Parts, Body System Parts.

7. Servicing, Remove and Install Automatic Transmission.

Audi Technician

2017–2018

1. Perform Oil Service Work, 30K Service, and 45 K Service as per Audi Maintenance Table.

2. Perform Pending Campaigns and Software updates in Audi Vehicles as required.

3. Use of Audi/Volkswagen Service Portal “Elsa Pro” for Maintenance Tables, Current Flow Diagram, Workshop Manual and Service TPI’s

4. Use of ODIS Tester for Various Service Resets, Fault Memory Reading, Follow Guided Fault Functions, Perform Adaptation, Basic Setting and Flash Programming.

5. Use of Special Service Tools for Engine and Trans Assemblies Removal and Installation

6. Perform DSG Transmissions Recommended Service

7. Prepare Technical Reports for Various Warranty Repairs.

8. Repair and Replace Suspension, Steering and Brake System Parts.

Mazda Technician

2014–2017

1. Perform all type of Periodic Maintenance and Services (A, B, C & D Types) on Mazda Vehicles as per Mazda Recommended Procedures.

2. Perform Service & Repair Work as per Mazda Information (Technical Bulletin Update) released by Mazda Factory for Under Warranty/Extended Warranty Vehicles.

3. Perform Suspension, Steering, Brakes Diagnosis, Service, Repair and Parts Replacement on Mazda Cars Model Ranges from Mazda 3(BK, BL, BM), Mazda 6 (GG, GH, GJ), Mazda 6 with Sky Active Technology, Mazda CX5 with Sky Active Technology, Mazda CX7 and Mazda CX9 Vehicles.

4. Perform Vehicle Air Conditioning System Inspection and Service.

5. Vehicles Key Programming using Mazda Modular Diagnostic Software (MMDS) Including VCM (Multiplex) and online Portal.

6. Perform Computerized Diagnosis by using Mazda Modular Diagnostic Software (MMDS) including VCM (Multiplex) for Computer Controlled Engine Systems Malfunctions.

Mercedes Benz Technician

2017–2017

1. Perform Service A, Service B and Service B Supplementary and reset the Instrument Cluster for Service Reminder.

2. Removal and Installation and Service of Mercedes Benz Transmissions 722.6, 722.9, 722.9 Pro, Replace of Solenoid Circuit Plate, Transmission Adaptation.

3. Use of Xentry Diagnostics for Computerized Scanning and Testing Such as Short Test for Fault Codes, Actual Values Analysis, Actuation and Adaptation, Components Testing, Software Updates, Vehicle Data Records. Warranty Repairs.

4. Use of Special Service Tools for Engine and Trans Assemblies Removal and Installation 6. Repair and Replace Suspension, Steering and Brake System Parts.

Toyota Technician

2011–2013

Ensure customers’ vehicles are Fixed Right, the first time.

Keep work areas orderly, clean and safe all the time and follow the safety procedures.

Troubleshoot and repair mechanical and electrical problems by following proper diagnostic procedure within allotted time.

Perform repairs by using Special Service Tools, Diagnostic Tool (intelligent tester) and Repair Manuals.

Prepare maintenance and repair estimations on the service cars.

Junior Level Technician Mercedes Benz

2009–2011

1. Inspection, Service and repair Mercedes vehicles

2. Repair and replace Mercedes Various Systems.

3. Electrical repair and components replacement by following safety measure

4. use of Autoboss Scanner and Launch X431

Profile last updated Nov 24, 2021.

Candidate #1314Technician in Karachi, Pakistan

Skills & Knowledge

Work Experience

Candidate #1314
Technician in Karachi, Pakistan