ICOM Change History
| Version | Field Changes | From | To | Last Modified | Modified By |
|---|---|---|---|---|---|
| 3 |
Description
From:
ICOM is for vehicles with OBD capability, Connect to ISIS/SSS/ISID with LAN or WAN. For special tools and diagnostic equipment purchases contact API International , or 512-280-4391. Additionally the Integrated Service Information Server (ISIS) is needed to reprogram vehicles. BMW original tester BMW ICOM BMW new system ISIS / diagnostic services, a BMW Group is the latest plan, diagnosis, coding and complete system designed to service the BMW Group, will replace GT1/SSS / BMW OPS diagnostic equipment for all future series will host ISID and through the ISIS system, ICOMA, ICOMB and ICOMC module to diagnose, programming, design codes and other related services ICOM A description (16PIN interface) ICOM A is the basic component. In physics, it would provide the vehicle diagnostic interface OBD II interface, and to provide adaptive integrated into the interface required to repair the network. Computer through an efficient core, as protocol converters and vehicle tester is responsible for data exchange between control unit and connected to the signal processing required measurement technology. Supply voltage by KL30 by vehicle interface. ICOM A of the electrical operation provides for a minimum voltage of 8V. Only the supply voltage exceeds the minimum limit in order to ensure a stable function. ICOM B function (MOST interface) ICOM B is the external ICOM A MOST (Media Transfer System) interface. It leads with the ICOM A via USB connection. By ICOM A supply voltage provided by the USB. Only when the lowest of the ICOM A supply voltage of 8V when, ICOM B would only be ready to run the electric vehicle side of the ICOM B in the MOST interface through a standard connection. ICOM C function (20PIN interface) ICOM C is an intelligent interface converter, it allows OBD II socket and BMW round match. As the lengthening of the auxiliary module, it will ICOM A and non-OBD II vehicle interface connection. Supply voltage side of the vehicle by the KL30 from the round socket provided. ICOM C electrical operation provides for a minimum voltage of 8V. KL30 on the voltage sent to the OBD II device on the inside, and thus to the ICOM A power supply. Only when the vehicle battery voltage exceeds the minimum limit in order to ensure stability of the interaction of two devices. It works on all old and new BMW models up to current. -ICOM A: Vehicles with OBD capability (Connect to ISIS/SSS/ISID with LAN or WAN) -ICOM B: For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system -ICOM C: Older model series with diagnosis socket in engine compartment (OBD 2) And it can do all functions just like dealers including programming and diagnostics.
To:
ICOM is for vehicles with OBD scan tool capability, Connect to ISIS/SSS/ISID with LAN or WAN. For special tools and diagnostic equipment purchases contact API International , or 512-280-4391. Additionally the Integrated Service Information Server (ISIS) is needed to reprogram vehicles. BMW original tester BMW ICOM BMW new system ISIS / diagnostic services, a BMW Group is the latest plan, diagnosis, coding and complete system designed to service the BMW Group, will replace GT1/SSS / BMW OPS diagnostic equipment for all future series will host ISID and through the ISIS system, ICOMA, ICOMB and ICOMC module to diagnose, programming, scantool functions, design codes and other related services ICOM A description (16PIN interface) ICOM A is the basic component. This provides connection the vehicle diagnostic interface OBD II interface, and to provide adaptive integrated into the interface required to repair the network. ICOM B function (MOST interface) ICOM B is the external ICOM A MOST (Media Transfer System) interface. It leads with the ICOM A via USB connection. By ICOM A supply voltage provided by the USB. Only when the lowest of the ICOM A supply voltage of 8V when, ICOM B would only be ready to run the electric vehicle side of the ICOM B in the MOST interface through a standard connection. ICOM C function (20PIN interface) ICOM C is an intelligent interface converter, it allows OBD II socket and BMW round match. As the lengthening of the auxiliary module, it will ICOM A and non-OBD II vehicle interface connection. It works on all old and new BMW models up to current. -ICOM A: Vehicles with OBD capability (Connect to ISIS/SSS/ISID with LAN or WAN) -ICOM B: For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system -ICOM C: Older model series with diagnosis socket in engine compartment (OBD 2) And it can do all functions just like dealers including programming and diagnostics.
Last Modified:
Modified By:
Scott Brown
|
ICOM is for vehicles with OBD capability, Connect to ISIS/SSS/ISID with LAN or WAN. For special tools and diagnostic equipment purchases contact API International , or 512-280-4391. Additionally the Integrated Service Information Server (ISIS) is needed to reprogram vehicles. BMW original tester BMW ICOM BMW new system ISIS / diagnostic services, a BMW Group is the latest plan, diagnosis, coding and complete system designed to service the BMW Group, will replace GT1/SSS / BMW OPS diagnostic equipment for all future series will host ISID and through the ISIS system, ICOMA, ICOMB and ICOMC module to diagnose, programming, design codes and other related services ICOM A description (16PIN interface) ICOM A is the basic component. In physics, it would provide the vehicle diagnostic interface OBD II interface, and to provide adaptive integrated into the interface required to repair the network. Computer through an efficient core, as protocol converters and vehicle tester is responsible for data exchange between control unit and connected to the signal processing required measurement technology. Supply voltage by KL30 by vehicle interface. ICOM A of the electrical operation provides for a minimum voltage of 8V. Only the supply voltage exceeds the minimum limit in order to ensure a stable function. ICOM B function (MOST interface) ICOM B is the external ICOM A MOST (Media Transfer System) interface. It leads with the ICOM A via USB connection. By ICOM A supply voltage provided by the USB. Only when the lowest of the ICOM A supply voltage of 8V when, ICOM B would only be ready to run the electric vehicle side of the ICOM B in the MOST interface through a standard connection. ICOM C function (20PIN interface) ICOM C is an intelligent interface converter, it allows OBD II socket and BMW round match. As the lengthening of the auxiliary module, it will ICOM A and non-OBD II vehicle interface connection. Supply voltage side of the vehicle by the KL30 from the round socket provided. ICOM C electrical operation provides for a minimum voltage of 8V. KL30 on the voltage sent to the OBD II device on the inside, and thus to the ICOM A power supply. Only when the vehicle battery voltage exceeds the minimum limit in order to ensure stability of the interaction of two devices. It works on all old and new BMW models up to current. -ICOM A: Vehicles with OBD capability (Connect to ISIS/SSS/ISID with LAN or WAN) -ICOM B: For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system -ICOM C: Older model series with diagnosis socket in engine compartment (OBD 2) And it can do all functions just like dealers including programming and diagnostics. |
ICOM is for vehicles with OBD scan tool capability, Connect to ISIS/SSS/ISID with LAN or WAN. For special tools and diagnostic equipment purchases contact API International , or 512-280-4391. Additionally the Integrated Service Information Server (ISIS) is needed to reprogram vehicles. BMW original tester BMW ICOM BMW new system ISIS / diagnostic services, a BMW Group is the latest plan, diagnosis, coding and complete system designed to service the BMW Group, will replace GT1/SSS / BMW OPS diagnostic equipment for all future series will host ISID and through the ISIS system, ICOMA, ICOMB and ICOMC module to diagnose, programming, scantool functions, design codes and other related services ICOM A description (16PIN interface) ICOM A is the basic component. This provides connection the vehicle diagnostic interface OBD II interface, and to provide adaptive integrated into the interface required to repair the network. ICOM B function (MOST interface) ICOM B is the external ICOM A MOST (Media Transfer System) interface. It leads with the ICOM A via USB connection. By ICOM A supply voltage provided by the USB. Only when the lowest of the ICOM A supply voltage of 8V when, ICOM B would only be ready to run the electric vehicle side of the ICOM B in the MOST interface through a standard connection. ICOM C function (20PIN interface) ICOM C is an intelligent interface converter, it allows OBD II socket and BMW round match. As the lengthening of the auxiliary module, it will ICOM A and non-OBD II vehicle interface connection. It works on all old and new BMW models up to current. -ICOM A: Vehicles with OBD capability (Connect to ISIS/SSS/ISID with LAN or WAN) -ICOM B: For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system -ICOM C: Older model series with diagnosis socket in engine compartment (OBD 2) And it can do all functions just like dealers including programming and diagnostics. |
Scott Brown | |
| 2 |
Year of Origin
|
Unknown | 2008 | Robert Nesbitt | |
|
Description
From:
ICOM is for vehicles with OBD capability, Connect to ISIS/SSS/ISID with LAN or WAN. For special tools and diagnostic equipment purchases contact API International , or 512-280-4391. Additionally the Integrated Service Information Server (ISIS) is needed to reprogram vehicles. BMW original tester BMW ICOM BMW new system ISIS / diagnostic services, a BMW Group is the latest plan, diagnosis, coding and complete system designed to service the BMW Group, will replace GT1/SSS / BMW OPS diagnostic equipment for all future series will host ISID and through the ISIS system, ICOMA, ICOMB and ICOMC module to diagnose, programming, design codes and other related services ICOM A description (16PIN interface) ICOMA is the basic component. In physics, it would provide the vehicle diagnostic interface OBD II interface, and to provide adaptive integrated into the interface required to repair the network. Computer through an efficient core, as protocol converters and vehicle tester is responsible for data exchange between control unit and connected to the signal processing required measurement technology. Supply voltage by KL30 by vehicle interface. ICOM A of the electrical operation provides for a minimum voltage of 8V. Only the supply voltage exceeds the minimum limit in order to ensure a stable function. ICOM B function (MOST interface) ICOM B is the external ICOM A MOST (Media Transfer System) interface. It leads with the ICOM A via USB connection. By ICOM A supply voltage provided by the USB. Only when the lowest of the ICOM A supply voltage of 8V when, ICOM B would only be ready to run the electric vehicle side of the ICOM B in the MOST interface through a standard connection. ICOM C function (20PIN interface) ICOM C is an intelligent interface converter, it allows OBD II socket and BMW round match. As the lengthening of the auxiliary module, it will ICOM A and non-OBD II vehicle interface connection. Supply voltage side of the vehicle by the KL30 from the round socket provided. ICOM C electrical operation provides for a minimum voltage of 8V. KL30 on the voltage sent to the OBD II device on the inside, and thus to the ICOM A power supply. Only when the vehicle battery voltage exceeds the minimum limit in order to ensure stability of the interaction of two devices. It works on all old and new BMW models up to current. -ICOM A: Vehicles with OBD capability (Connect to ISIS/SSS/ISID with LAN or WAN) -ICOM B: For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system -ICOM C: Older model series with diagnosis socket in engine compartment (OBD 2) And it can do all functions just like dealers including programming and diagnostics.
To:
ICOM is for vehicles with OBD capability, Connect to ISIS/SSS/ISID with LAN or WAN. For special tools and diagnostic equipment purchases contact API International , or 512-280-4391. Additionally the Integrated Service Information Server (ISIS) is needed to reprogram vehicles. BMW original tester BMW ICOM BMW new system ISIS / diagnostic services, a BMW Group is the latest plan, diagnosis, coding and complete system designed to service the BMW Group, will replace GT1/SSS / BMW OPS diagnostic equipment for all future series will host ISID and through the ISIS system, ICOMA, ICOMB and ICOMC module to diagnose, programming, design codes and other related services ICOM A description (16PIN interface) ICOM A is the basic component. In physics, it would provide the vehicle diagnostic interface OBD II interface, and to provide adaptive integrated into the interface required to repair the network. Computer through an efficient core, as protocol converters and vehicle tester is responsible for data exchange between control unit and connected to the signal processing required measurement technology. Supply voltage by KL30 by vehicle interface. ICOM A of the electrical operation provides for a minimum voltage of 8V. Only the supply voltage exceeds the minimum limit in order to ensure a stable function. ICOM B function (MOST interface) ICOM B is the external ICOM A MOST (Media Transfer System) interface. It leads with the ICOM A via USB connection. By ICOM A supply voltage provided by the USB. Only when the lowest of the ICOM A supply voltage of 8V when, ICOM B would only be ready to run the electric vehicle side of the ICOM B in the MOST interface through a standard connection. ICOM C function (20PIN interface) ICOM C is an intelligent interface converter, it allows OBD II socket and BMW round match. As the lengthening of the auxiliary module, it will ICOM A and non-OBD II vehicle interface connection. Supply voltage side of the vehicle by the KL30 from the round socket provided. ICOM C electrical operation provides for a minimum voltage of 8V. KL30 on the voltage sent to the OBD II device on the inside, and thus to the ICOM A power supply. Only when the vehicle battery voltage exceeds the minimum limit in order to ensure stability of the interaction of two devices. It works on all old and new BMW models up to current. -ICOM A: Vehicles with OBD capability (Connect to ISIS/SSS/ISID with LAN or WAN) -ICOM B: For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system -ICOM C: Older model series with diagnosis socket in engine compartment (OBD 2) And it can do all functions just like dealers including programming and diagnostics.
Last Modified:
Modified By:
Robert Nesbitt
|
ICOM is for vehicles with OBD capability, Connect to ISIS/SSS/ISID with LAN or WAN. For special tools and diagnostic equipment purchases contact API International , or 512-280-4391. Additionally the Integrated Service Information Server (ISIS) is needed to reprogram vehicles. BMW original tester BMW ICOM BMW new system ISIS / diagnostic services, a BMW Group is the latest plan, diagnosis, coding and complete system designed to service the BMW Group, will replace GT1/SSS / BMW OPS diagnostic equipment for all future series will host ISID and through the ISIS system, ICOMA, ICOMB and ICOMC module to diagnose, programming, design codes and other related services ICOM A description (16PIN interface) ICOMA is the basic component. In physics, it would provide the vehicle diagnostic interface OBD II interface, and to provide adaptive integrated into the interface required to repair the network. Computer through an efficient core, as protocol converters and vehicle tester is responsible for data exchange between control unit and connected to the signal processing required measurement technology. Supply voltage by KL30 by vehicle interface. ICOM A of the electrical operation provides for a minimum voltage of 8V. Only the supply voltage exceeds the minimum limit in order to ensure a stable function. ICOM B function (MOST interface) ICOM B is the external ICOM A MOST (Media Transfer System) interface. It leads with the ICOM A via USB connection. By ICOM A supply voltage provided by the USB. Only when the lowest of the ICOM A supply voltage of 8V when, ICOM B would only be ready to run the electric vehicle side of the ICOM B in the MOST interface through a standard connection. ICOM C function (20PIN interface) ICOM C is an intelligent interface converter, it allows OBD II socket and BMW round match. As the lengthening of the auxiliary module, it will ICOM A and non-OBD II vehicle interface connection. Supply voltage side of the vehicle by the KL30 from the round socket provided. ICOM C electrical operation provides for a minimum voltage of 8V. KL30 on the voltage sent to the OBD II device on the inside, and thus to the ICOM A power supply. Only when the vehicle battery voltage exceeds the minimum limit in order to ensure stability of the interaction of two devices. It works on all old and new BMW models up to current. -ICOM A: Vehicles with OBD capability (Connect to ISIS/SSS/ISID with LAN or WAN) -ICOM B: For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system -ICOM C: Older model series with diagnosis socket in engine compartment (OBD 2) And it can do all functions just like dealers including programming and diagnostics. |
ICOM is for vehicles with OBD capability, Connect to ISIS/SSS/ISID with LAN or WAN. For special tools and diagnostic equipment purchases contact API International , or 512-280-4391. Additionally the Integrated Service Information Server (ISIS) is needed to reprogram vehicles. BMW original tester BMW ICOM BMW new system ISIS / diagnostic services, a BMW Group is the latest plan, diagnosis, coding and complete system designed to service the BMW Group, will replace GT1/SSS / BMW OPS diagnostic equipment for all future series will host ISID and through the ISIS system, ICOMA, ICOMB and ICOMC module to diagnose, programming, design codes and other related services ICOM A description (16PIN interface) ICOM A is the basic component. In physics, it would provide the vehicle diagnostic interface OBD II interface, and to provide adaptive integrated into the interface required to repair the network. Computer through an efficient core, as protocol converters and vehicle tester is responsible for data exchange between control unit and connected to the signal processing required measurement technology. Supply voltage by KL30 by vehicle interface. ICOM A of the electrical operation provides for a minimum voltage of 8V. Only the supply voltage exceeds the minimum limit in order to ensure a stable function. ICOM B function (MOST interface) ICOM B is the external ICOM A MOST (Media Transfer System) interface. It leads with the ICOM A via USB connection. By ICOM A supply voltage provided by the USB. Only when the lowest of the ICOM A supply voltage of 8V when, ICOM B would only be ready to run the electric vehicle side of the ICOM B in the MOST interface through a standard connection. ICOM C function (20PIN interface) ICOM C is an intelligent interface converter, it allows OBD II socket and BMW round match. As the lengthening of the auxiliary module, it will ICOM A and non-OBD II vehicle interface connection. Supply voltage side of the vehicle by the KL30 from the round socket provided. ICOM C electrical operation provides for a minimum voltage of 8V. KL30 on the voltage sent to the OBD II device on the inside, and thus to the ICOM A power supply. Only when the vehicle battery voltage exceeds the minimum limit in order to ensure stability of the interaction of two devices. It works on all old and new BMW models up to current. -ICOM A: Vehicles with OBD capability (Connect to ISIS/SSS/ISID with LAN or WAN) -ICOM B: For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system -ICOM C: Older model series with diagnosis socket in engine compartment (OBD 2) And it can do all functions just like dealers including programming and diagnostics. |
|||
| 1 |
Page Created
|
Robert Nesbitt |