wiTECH 1.0 Diagnostic Application Change History
| Version | Field Changes | From | To | Last Modified | Modified By |
|---|---|---|---|---|---|
| 9 |
Description
From:
La aplicación de diagnóstico wiTECH 1.0 (que incluye funciones de programación y seguridad) se utiliza para interactuar con los automóviles Dodge, Chrysler, Jeep y Fiat norteamericanos. El software se conecta a dispositivos StarMOBILE, wiTECH VCI Pod y microPOD II . Este sistema es necesario para conectarse a todos los vehículos Chrysler CAN. La aplicación también incluye un emulador DRBIII para comunicarse con vehículos anteriores. Nota: a partir del 11 de septiembre de 2015, se produjo una separación del sistema operativo del dispositivo microPOD con wiTECH. Debido a las actualizaciones de seguridad nuevas y requeridas, los dispositivos microPOD ya no serán compatibles con AMBOS wiTECH 16.01 o más reciente (también llamado wiTECH 1.0) y la aplicación de diagnóstico wiTECH 2.0 basada en la web (Mopar) al mismo tiempo. Nota: La aplicación wiTECH 2.0 Scantool se ha implementado solo para los concesionarios franquiciados de FCA en los EE. UU. Y Canadá Tenga en cuenta que con wiTECH 16.01 y versiones más recientes, se le solicitará al usuario la opción de convertir el sistema operativo microPOD II para usarlo con wiTECH 1.0 (versión 16.01 y posteriores) únicamente. El mensaje aparecerá la próxima vez que se utilice el microPOD II con la aplicación de diagnóstico wiTECH si el usuario seleccionó EE. UU. O Canadá como país durante la instalación de wiTECH 16.01 y futuras versiones de wiTECH 1.0. Consulte la imagen de la pantalla a continuación. Nota: El wiTECH VCI Pod (también conocido como wiPOD) NO se ve afectado por esta actualización y seguirá funcionando con wiTECH 16.01 y cualquier versión futura de la herramienta de escaneo wiTECH 1.0.
To:
La aplicación de diagnóstico wiTECH 1.0 (que incluye funciones de programación y seguridad) se utiliza para interactuar con los automóviles Dodge, Chrysler, Jeep y Fiat norteamericanos. El software se conecta a dispositivos StarMOBILE, wiTECH VCI Pod y microPOD II . Este sistema es necesario para conectarse a todos los vehículos Chrysler CAN. La aplicación también incluye un emulador DRBIII para comunicarse con vehículos anteriores. Nota: a partir del 11 de septiembre de 2015, se produjo una separación del sistema operativo del dispositivo microPOD con wiTECH. Debido a las actualizaciones de seguridad nuevas y requeridas, los dispositivos microPOD ya no serán compatibles con AMBOS wiTECH 16.01 o más reciente (también llamado wiTECH 1.0) y la wiTECH 2.0 Diagnostic Application (Mopar) basada en la web wiTECH 2.0 Diagnostic Application (Mopar) al mismo tiempo. Nota: La aplicación wiTECH 2.0 Scantool se ha implementado solo para los concesionarios franquiciados de FCA en los EE. UU. Y Canadá Tenga en cuenta que con wiTECH 16.01 y versiones más recientes, se le solicitará al usuario la opción de convertir el sistema operativo microPOD II para usarlo con wiTECH 1.0 (versión 16.01 y posteriores) únicamente. El mensaje aparecerá la próxima vez que utilice el microPOD II con la aplicación de diagnóstico wiTECH si el usuario seleccionado EE. UU. O Canadá como país durante la instalación de wiTECH 16.01 y futuras versiones de wiTECH 1.0. Consulte la imagen de la pantalla a continuación. Nota: El wiTECH VCI Pod (también conocido como wiPOD) NO se ve afectado por esta actualización y seguirá funcionando con wiTECH 16.01 y cualquier versión futura de la herramienta de escaneo wiTECH 1.0.
Last Modified:
Modified By:
Julio Juarez Ramirez
|
La aplicación de diagnóstico wiTECH 1.0 (que incluye funciones de programación y seguridad) se utiliza para interactuar con los automóviles Dodge, Chrysler, Jeep y Fiat norteamericanos. El software se conecta a dispositivos StarMOBILE, wiTECH VCI Pod y microPOD II . Este sistema es necesario para conectarse a todos los vehículos Chrysler CAN. La aplicación también incluye un emulador DRBIII para comunicarse con vehículos anteriores. Nota: a partir del 11 de septiembre de 2015, se produjo una separación del sistema operativo del dispositivo microPOD con wiTECH. Debido a las actualizaciones de seguridad nuevas y requeridas, los dispositivos microPOD ya no serán compatibles con AMBOS wiTECH 16.01 o más reciente (también llamado wiTECH 1.0) y la aplicación de diagnóstico wiTECH 2.0 basada en la web (Mopar) al mismo tiempo. Nota: La aplicación wiTECH 2.0 Scantool se ha implementado solo para los concesionarios franquiciados de FCA en los EE. UU. Y Canadá Tenga en cuenta que con wiTECH 16.01 y versiones más recientes, se le solicitará al usuario la opción de convertir el sistema operativo microPOD II para usarlo con wiTECH 1.0 (versión 16.01 y posteriores) únicamente. El mensaje aparecerá la próxima vez que se utilice el microPOD II con la aplicación de diagnóstico wiTECH si el usuario seleccionó EE. UU. O Canadá como país durante la instalación de wiTECH 16.01 y futuras versiones de wiTECH 1.0. Consulte la imagen de la pantalla a continuación. Nota: El wiTECH VCI Pod (también conocido como wiPOD) NO se ve afectado por esta actualización y seguirá funcionando con wiTECH 16.01 y cualquier versión futura de la herramienta de escaneo wiTECH 1.0. |
La aplicación de diagnóstico wiTECH 1.0 (que incluye funciones de programación y seguridad) se utiliza para interactuar con los automóviles Dodge, Chrysler, Jeep y Fiat norteamericanos. El software se conecta a dispositivos StarMOBILE, wiTECH VCI Pod y microPOD II . Este sistema es necesario para conectarse a todos los vehículos Chrysler CAN. La aplicación también incluye un emulador DRBIII para comunicarse con vehículos anteriores. Nota: a partir del 11 de septiembre de 2015, se produjo una separación del sistema operativo del dispositivo microPOD con wiTECH. Debido a las actualizaciones de seguridad nuevas y requeridas, los dispositivos microPOD ya no serán compatibles con AMBOS wiTECH 16.01 o más reciente (también llamado wiTECH 1.0) y la wiTECH 2.0 Diagnostic Application (Mopar) basada en la web wiTECH 2.0 Diagnostic Application (Mopar) al mismo tiempo. Nota: La aplicación wiTECH 2.0 Scantool se ha implementado solo para los concesionarios franquiciados de FCA en los EE. UU. Y Canadá Tenga en cuenta que con wiTECH 16.01 y versiones más recientes, se le solicitará al usuario la opción de convertir el sistema operativo microPOD II para usarlo con wiTECH 1.0 (versión 16.01 y posteriores) únicamente. El mensaje aparecerá la próxima vez que utilice el microPOD II con la aplicación de diagnóstico wiTECH si el usuario seleccionado EE. UU. O Canadá como país durante la instalación de wiTECH 16.01 y futuras versiones de wiTECH 1.0. Consulte la imagen de la pantalla a continuación. Nota: El wiTECH VCI Pod (también conocido como wiPOD) NO se ve afectado por esta actualización y seguirá funcionando con wiTECH 16.01 y cualquier versión futura de la herramienta de escaneo wiTECH 1.0. |
Julio Juarez Ramirez | |
| 8 |
Description
From:
The wiTECH 1.0 Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 Diagnostic Application (Mopar)application at the same time. Note: wiTECH 2.0 Scantool Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0 scan tool.
To:
La aplicación de diagnóstico wiTECH 1.0 (que incluye funciones de programación y seguridad) se utiliza para interactuar con los automóviles Dodge, Chrysler, Jeep y Fiat norteamericanos. El software se conecta a dispositivos StarMOBILE, wiTECH VCI Pod y microPOD II . Este sistema es necesario para conectarse a todos los vehículos Chrysler CAN. La aplicación también incluye un emulador DRBIII para comunicarse con vehículos anteriores. Nota: a partir del 11 de septiembre de 2015, se produjo una separación del sistema operativo del dispositivo microPOD con wiTECH. Debido a las actualizaciones de seguridad nuevas y requeridas, los dispositivos microPOD ya no serán compatibles con AMBOS wiTECH 16.01 o más reciente (también llamado wiTECH 1.0) y la aplicación de diagnóstico wiTECH 2.0 basada en la web (Mopar) al mismo tiempo. Nota: La aplicación wiTECH 2.0 Scantool se ha implementado solo para los concesionarios franquiciados de FCA en los EE. UU. Y Canadá Tenga en cuenta que con wiTECH 16.01 y versiones más recientes, se le solicitará al usuario la opción de convertir el sistema operativo microPOD II para usarlo con wiTECH 1.0 (versión 16.01 y posteriores) únicamente. El mensaje aparecerá la próxima vez que se utilice el microPOD II con la aplicación de diagnóstico wiTECH si el usuario seleccionó EE. UU. O Canadá como país durante la instalación de wiTECH 16.01 y futuras versiones de wiTECH 1.0. Consulte la imagen de la pantalla a continuación. Nota: El wiTECH VCI Pod (también conocido como wiPOD) NO se ve afectado por esta actualización y seguirá funcionando con wiTECH 16.01 y cualquier versión futura de la herramienta de escaneo wiTECH 1.0.
Last Modified:
Modified By:
Julio Juarez Ramirez
|
The wiTECH 1.0 Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 Diagnostic Application (Mopar)application at the same time. Note: wiTECH 2.0 Scantool Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0 scan tool. |
La aplicación de diagnóstico wiTECH 1.0 (que incluye funciones de programación y seguridad) se utiliza para interactuar con los automóviles Dodge, Chrysler, Jeep y Fiat norteamericanos. El software se conecta a dispositivos StarMOBILE, wiTECH VCI Pod y microPOD II . Este sistema es necesario para conectarse a todos los vehículos Chrysler CAN. La aplicación también incluye un emulador DRBIII para comunicarse con vehículos anteriores. Nota: a partir del 11 de septiembre de 2015, se produjo una separación del sistema operativo del dispositivo microPOD con wiTECH. Debido a las actualizaciones de seguridad nuevas y requeridas, los dispositivos microPOD ya no serán compatibles con AMBOS wiTECH 16.01 o más reciente (también llamado wiTECH 1.0) y la aplicación de diagnóstico wiTECH 2.0 basada en la web (Mopar) al mismo tiempo. Nota: La aplicación wiTECH 2.0 Scantool se ha implementado solo para los concesionarios franquiciados de FCA en los EE. UU. Y Canadá Tenga en cuenta que con wiTECH 16.01 y versiones más recientes, se le solicitará al usuario la opción de convertir el sistema operativo microPOD II para usarlo con wiTECH 1.0 (versión 16.01 y posteriores) únicamente. El mensaje aparecerá la próxima vez que se utilice el microPOD II con la aplicación de diagnóstico wiTECH si el usuario seleccionó EE. UU. O Canadá como país durante la instalación de wiTECH 16.01 y futuras versiones de wiTECH 1.0. Consulte la imagen de la pantalla a continuación. Nota: El wiTECH VCI Pod (también conocido como wiPOD) NO se ve afectado por esta actualización y seguirá funcionando con wiTECH 16.01 y cualquier versión futura de la herramienta de escaneo wiTECH 1.0. |
Julio Juarez Ramirez | |
| 7 |
Description
From:
The wiTECH 1.0 Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Scantool Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0 scan tool.
To:
The wiTECH 1.0 Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 Diagnostic Application (Mopar)application at the same time. Note: wiTECH 2.0 Scantool Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0 scan tool.
Last Modified:
Modified By:
Scott Brown
|
The wiTECH 1.0 Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Scantool Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0 scan tool. |
The wiTECH 1.0 Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 Diagnostic Application (Mopar)application at the same time. Note: wiTECH 2.0 Scantool Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0 scan tool. |
Scott Brown | |
| 6 |
Name
From:
wiTECH Diagnostic Application
To:
wiTECH 1.0 Diagnostic Application
Last Modified:
Modified By:
Scott Brown
|
wiTECH Diagnostic Application | wiTECH 1.0 Diagnostic Application | Scott Brown | |
|
Description
From:
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Scantool Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0 scan tool.
To:
The wiTECH 1.0 Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Scantool Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0 scan tool.
Last Modified:
Modified By:
Scott Brown
|
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Scantool Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0 scan tool. |
The wiTECH 1.0 Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Scantool Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0 scan tool. |
|||
| 5 |
Description
From:
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0.
To:
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Scantool Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0 scan tool.
Last Modified:
Modified By:
Scott Brown
|
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0. |
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Scantool Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0 scan tool. |
Scott Brown | |
|
Company
|
Mopar | ||||
| 4 |
Description
From:
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the MicroPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0.
To:
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0.
Last Modified:
Modified By:
Scott Brown
|
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the MicroPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0. |
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the microPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0. |
Scott Brown | |
| 3 |
Description
From:
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the MicroPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles.
To:
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the MicroPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0.
Last Modified:
Modified By:
Scott Brown
|
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the MicroPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. |
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the MicroPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. Note: as of September 11, 2015 there has been a separation of the microPOD device operating system with wiTECH. Due to new and required security updates, microPOD devices will no longer be compatible with BOTH wiTECH 16.01 or newer (also called as wiTECH 1.0) and the web-based wiTECH 2.0 application at the same time. Note: wiTECH 2.0 Application has been deployed to only FCA franchised dealers in the US and Canada Please be advised that with wiTECH 16.01 and newer releases the user will be prompted with a choice to convert the microPOD II operating system for use with wiTECH 1.0 (version 16.01 and later) only. The prompt will appear next time the microPOD II is used with wiTECH Diagnostic Application if the user selected US or Canada as the country during the installation of wiTECH 16.01 and furture versions of wiTECH 1.0. Please refer the screen image below. Note: The wiTECH VCI Pod (also known as wiPOD) is NOT impacted by this update and it will continue to be functional with wiTECH 16.01 and any future versions of wiTECH 1.0. |
Scott Brown | |
| 2 |
Description
From:
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrylser, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the MicroPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles.
To:
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the MicroPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles.
Last Modified:
Modified By:
Scott Brown
|
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrylser, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the MicroPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. |
The wiTECH Diagnostic Application (which includes programming and security functions) is used to interface with Dodge, Chrysler, Jeep and North American Fiat automobiles. The software connects to StarMOBILE devices, wiTECH VCI Pod and the MicroPOD II. This system is required in order to connect to all Chrysler CAN vehicles. The application also includes a DRBIII emulator for communication with earlier vehicles. |
Scott Brown | |
| 1 |
Page Created
|
Scott Brown |