| 4 |
Description
From:
Installing a ball joint on a lower control arm typically requires the effort of two people. However, with this tool and our No. 7420 or 7421 pry bar - or any 7/8" diameter pry bar - it's a one-person job.
To:
Installing a ball joint on a lower control arm typically requires the effort of two people. However, with this tool and an OTC No. 7420 or 7421 pry bar - or any 7/8" diameter pry bar - it's a one-person job.
Last Modified:
|
Installing a ball joint on a lower control arm typically requires the effort of two people. However, with this tool and our No. 7420 or 7421 pry bar - or any 7/8" diameter pry bar - it's a one-person job. |
Installing a ball joint on a lower control arm typically requires the effort of two people. However, with this tool and an OTC No. 7420 or 7421 pry bar - or any 7/8" diameter pry bar - it's a one-person job. |
|
Gary Fetting |
| 3 |
Description
From:
I've always just used a big pry bar to move lower control arms. But now in my sixties and a one-man operation, I was considering shelling out $200+ for a fancy lower control arm tool when I came across the OTC #6007 for under $20. I thought, "what do I have to lose"? So I picked one up. It works really good. I use it with the OTC #7168 30" round pry bar (and sometimes a pipe on the end of that). It will fit and pry bar that has a max diameter of 7/8", preferably round. Highly recommended.
To:
Installing a ball joint on a lower control arm typically requires the effort of two people. However, with this tool and our No. 7420 or 7421 pry bar - or any 7/8" diameter pry bar - it's a one-person job.
Last Modified:
|
I've always just used a big pry bar to move lower control arms. But now in my sixties and a one-man operation, I was considering shelling out $200+ for a fancy lower control arm tool when I came across the OTC #6007 for under $20. I thought, "what do I have to lose"? So I picked one up. It works really good. I use it with the OTC #7168 30" round pry bar (and sometimes a pipe on the end of that). It will fit and pry bar that has a max diameter of 7/8", preferably round. Highly recommended. |
Installing a ball joint on a lower control arm typically requires the effort of two people. However, with this tool and our No. 7420 or 7421 pry bar - or any 7/8" diameter pry bar - it's a one-person job. |
|
Gary Fetting |
| 2 |
Name
From:
6007 Lower Control Arm Tool
To:
Lower Control Arm Tool #6007
Last Modified:
|
6007 Lower Control Arm Tool |
Lower Control Arm Tool #6007 |
|
Gary Fetting |
|
Year of Origin
From:
[None]
To:
Unknown
Last Modified:
|
[None] |
Unknown |
|
Year Discontinued
From:
[None]
To:
Currently Available
Last Modified:
|
[None] |
Currently Available |
|
Main Website URL
From:
[None]
Last Modified:
|
[None] |
https://www.otctools.com/products/lower-control-arm-prying-tool |
|
Amazon Page
From:
[None]
Last Modified:
|
[None] |
https://www.amazon.com/dp/B000R5BLW4/?tag=autoprowiki-20 |
|
Description
From:
[None]
To:
I've always just used a big pry bar to move lower control arms. But now in my sixties and a one-man operation, I was considering shelling out $200+ for a fancy lower control arm tool when I came across the OTC #6007 for under $20. I thought, "what do I have to lose"? So I picked one up. It works really good. I use it with the OTC #7168 30" round pry bar (and sometimes a pipe on the end of that). It will fit and pry bar that has a max diameter of 7/8", preferably round. Highly recommended.
Last Modified:
|
[None] |
I've always just used a big pry bar to move lower control arms. But now in my sixties and a one-man operation, I was considering shelling out $200+ for a fancy lower control arm tool when I came across the OTC #6007 for under $20. I thought, "what do I have to lose"? So I picked one up. It works really good. I use it with the OTC #7168 30" round pry bar (and sometimes a pipe on the end of that). It will fit and pry bar that has a max diameter of 7/8", preferably round. Highly recommended. |
|
Image
From:
[None]
To:
Last Modified:
|
[None] |
|
|
Category
From:
[None]
To:
Tool & Equipment
Last Modified:
|
[None] |
Tool & Equipment |
| 1 |
Page Created
|
|
|
|
Gary Fetting |
